Laptop Keyboard Hacks: DIY Tips for Repairing

When you are getting things done, as much as possible you want everything to run smoothly but when it comes to a keyboard that is hard to type, it will not be much help. It can make you frustrated and disappointed at the end of the day. The good news is that there are helpful tips you can try at home for repaired laptop keyboards.

Before anything, you should first understand the reasons why your laptop keyboard stopped working. It can be an issue of a bad hardware driver or a bad connection. There is also a possibility that you have wrong regional settings and the most common reason is an accumulation of dirt and dust.

To help you get started, here are some tips for repairing laptop.

Clean the keyboards

The basic thing that you can do is to clean the keyboards. Keep in mind that foreign matters can cause the board to short circuit. If you spilled something, it is crucial that you unplug the laptop and then turn its keyboard upside down. At the end of the day, this will allow food particles and liquids to fall.

If there is no spill, you can use compressed air. This will allow you to extract foreign matter. This is by far the easiest way of cleaning the keyboards without removing the keys or the board.

De-stick the keys

If you notice that your laptop keys popped out, it is time that you consider de-sticking it. To de-stick, you should consider the following:

Take a photo of the keyboard layout: the first thing that you need to do is to take a photo of the keyboard’s layout. This is important so you can easily reassemble it after.

Remove the keys: the next thing to do is gently remove the keys. Avoid pulling too hard especially if the keys are not easily popping out. If the keys are hard to pull out, you should assume that there is a metal hook that needs sliding to release the keys.

Collect the keys: to prevent losing any keys and to prepare it for washing, you should collect the keys and put in cheesecloth or a fine mesh bag.

Wash the keys: you can now put the keys in the dishwasher. This is to ensure that the keys are properly cleaned and sanitized.

Put it back: after one cycle in the dishwasher, you can remove the keys and then dry it using paper towels. After this, you can simply put them back to their original positions. If you forgot the placements, this is where the photo of the keyboard layout can come in handy.

Replace damaged keys

If you notice your keys are sticky or not working at all, you can usually replace the entire keyboard. The cost will depend on the laptop brand but on average you can buy between $20 and $60.

The good news is that replacing damaged keys is not that difficult as you might think. Before you replace the keys, you should check first if your laptop is still under warranty. If it is still under warranty, you can get a replacement for free.

If it is no longer covered, you should consider the following steps:

Obtain the right keyboard: the first step is to obtain the right keyboard. Remember that there is no one-keyboard-that-fits-all. This means you have to scour the market to find the right one for your laptop. Fortunately, you can easily consider specialty online stores. Make sure to read online reviews before settling so you can compare prices. The key here is to ensure that the keyboard is the exact model number of the laptop.

Read the manual or instructions: the next thing that you should do is to read the manual or instructions. This is important to see if they offer exact instructions for DIY repair. If they do not offer such instructions, you can always try searching online – just take note of your laptop’s model number.

see if it appears right: before touching the keyboard, make sure that it appears to be the right size and shape. You can do this by placing the new keyboard on the laptop.

Gather tools: you can now start to replace but you have to ensure that you have gathered the right tools like small Phillips screwdriver and butter knife. The screwdriver is important for removing the small screws while the butter knife can be used for prying the covers.

Turn off: before you completely pry the covers and replace the keyboards, you should make sure to turn off the power. You should make sure to unplug the power cord at the same time take the battery out to be safe.

Remove and replace: remove any screws that hold the cover together. Before completely removing, make sure that there is no data cable on the back, which is connected to your laptop. Next, you should pick your new keyboard and align it. Do not forget to reinsert the screws holding the keyboard down.

Final words

You have to remember that the size and weight limitations of laptop keyboards are not sturdily created, which can be easily damaged by foreign matter. You can do a DIY repair but if you want to be sure, you should always consider the help of professionals especially when it comes to broken mechanisms and damaged circuits.

If you do have any laptop keyboard problems that you cant fix you can contact Certified Phone Repair Company

Leave a Comment

Your email address will not be published.